5 Reasons to use Electrician Tool Belt Setup

electrician tool belt setup

5 Reasons to use Electrician Tool Belt Setup

electrician tool belt setup
A good electrician tool belt setup saves you time and weight. Indeed, both are important because an electrician has to wear a belt for many hours daily. First, let’s discuss time and weight and then we will see the best tools you can have in your tool bag and why.

Save Time

electrician tool belt setup

Imagine working far from your truck and realizing that the tool you need is not present in the tool bag. I don’t know about you, but my experience of walking back to the truck in Texas summer heat is something I can recall thirty years down the road.

Therefore, you got to have the right tools in your electrician tool belt setup. We will discuss the apprentice tool you need to carry later in this blog. However, saving time by having all the tools in your tool bag does not mean you should overload it. Indeed, a bag with extra tools will increase its weight and make it difficult to carry around for a long time.

Distribute Weight

electrician tool belt setup

A good electrician tool belt helps you maintain the correct weight of the bag. That I can tell you what happened to me during my apprentice years. Hence, I would get excited and carry a few extra tools in the bag one day.  

At the day’s end, I would realize that a few additional tools have just increased the bag’s weight just for nothing. The next day I would swing. I mean, I won’t offload only the extra tools. Instead, I would leave some essential tools back in the truck. Naturally, on those days, I had to walk back to the truck from the site at least once a day, like I said, on those blazing hot summer days in Texas.

Keeping the Right Tools

electrician tool belt setup

There are essential tools, and then there are job-related tools. That is something I have learned from experience. Of course, we carry some tools all the time. But then there are few that you need only for a specific job. So before heading out, find out precisely what you have to do at the site. For example, you may not need a drill for every job. Indeed drill has some weight. Imagine walking around a few hours with a drill when you don’t have a use for it. Choosing the right tools in your electrician tool belt setup is a great technique for comfort.

Now you might be wondering how you can order a classic electrician tool belt setup made with leather. Well, look no further because we have a perfect system for you.

Check it out!electrician tool belt setup

Professional Electrician System:

How to Wear a Tool Belt

how to wear a tool belt

How to Wear a Tool Belt?

We surveyed professionals and requested them to tell us how to wear a tool belt. Do they keep their bags in front, sides of, back? Here’s what they told us.

How to Wear a Framing System?

how to wear a tool belt
One professional said:

“I have multiple sets of bags. Evidently, I wear them differently depending on what job I’m doing. For framing, they are on my side. Therefore, I can easily pass through between wall studs. Furthermore, my siding and trim bags ride on my back. It makes it easier to safely negotiate ladders and scaffolding. However, I like an apron-style set of bags in the front if I’m doing interior trim. Obliviously, it is less likely that my tools will accidentally gouge the walls or damage the trim”.

Another one of the pros with over three decades of experience said about wearing a tool belt:

“About 30 years ago, I did a lot of framing and roofing. Pneumatic guns were newer, so I wear mine to the side to keep my stick nails and basic tools at my side and coil nails and two-way radio in the back. However, now I do more repair work and remodelling, so I no longer wear a belt unless I am up a ladder or on a pick. I still wear it to the left side”.

How to Wear a Carpenter System?

how to wear a tool belt
He has said it all:

“Clearly, I always have loose tool bags that can move on the tool belt. In other words, adjust as needed for tight spaces and what you are doing right now. Moreover, loads on the sides where your hands naturally fall most often. But they can quickly move to the back when they get in the way or bang into your work. If you are right-handed, hammer on the right side on the back edge of the bag. Most of your right-hand tools, pencil, utility knife, scribe, and other tools are in the right bag. Fasteners, nails etc., on the left bag.

Left bag tools, cats paw, combination square, plumb bob, nail set things you use with your left hand. Adjust your tools to what you are doing, not everything you may do on the whole job. Consider having two sets of tool bags. One set for building site preparation and rough work.

Moreover, a second set for general construction. Obviously, keep the tools you will need, but don’t expect to use them in the next three or four hours. Modify your tool bags as needed, use add on pieces if they work for what you are doing. In addition, try spenders; see how they work for you. Avoid the enormous tool bag sets. They really can get in the way and make for an unnecessarily heavy load”.

This carpenter has a reason for keeping the bag front, sides or back:

“Wear it both ways; depending on what I’m working on it and where I’m working at! In other words, if I’m working in the field I wear it on the back or sides. For example, if I’m working on a bench (like in my shop), I might wear it in the front. Furthermore, besides doing construction and being a mechanic- I also was a faithful follower and an arborist-doing those activities, I wore my utility belt in the back to climb better with fewer things getting in my way as I was manoeuvring.

Importantly, if I’m going to be manoeuvring a lot of the utility belt in the back- if I am going to be stationary most of the time, I might consider wearing it in the front- sometimes I forget what tools I had with me, and it made the job a lot harder because I couldn’t see them and that they were on the utility belt. Wearing on the sides is good. I used to like wearing my hammer in the back; not like other tools where you might forget you have one, always know you supposed to have a hammer, lol”.

A carpenter shares his experience with wearing a tool belt:

 “I’m a GC and I do carpentry primarily, remodels, and lots of exterior work, and I wear my tool belt and pouches on the back and sides. Occasionally, I add a bolt bag upfront to hold nail strips when framing. Still, it doesn’t get in the way because if you do any bending/kneeling or climbing ladders, you have to wear it on the back, but I can see how it would be advantageous if you stood upright all day in a shop setting to wear everything upfront.

Moreover, I have different techniques for different applications. The door installer I used wore his belt up front, and it looked absurd to me, but he did fantastic work and practically worked miracles, so I kept my thoughts to myself. Now I realize his position choice probably worked best for him, whether intentional or not”.

Attaching the Suspenders

how to wear a tool belt
Here is another interesting answer to how to wear a tool belt:

“My belt has pouches on the sides, with small ones on the front along my waist, which leaves the back open to hang power tools such as drill/impact or whatever I happen to be using it at the time. Moreover, if it’s getting weighed down a lot I’ll use suspender straps as well. Wearing the kind of belt you have on the back seems off. I always use that style in the front but usually opt for my standard side pouch belt though it depends what I’m doing”.

Attaching the Pouch

how to wear a tool belt
Here is an exciting hack for those who have to carry lots of fasteners:

“A trick I picked up some years ago is to cut the top off a quart of automotive oil bottle, wash it out thoroughly and use it to carry nails or screws (I sometimes frame with both) in your pouch. The plastic container is more accessible (for me, at least) to grab nails from, saves wear on the pouch, and can be used to scoop nails or screws from a bucket or box then dropped back into the pouch without dropping any in the wrong pouch. In the larger pouches, I’ve also used the bottom of a narrow laundry detergent bottle”.

We like what this gentleman has to say about attaching the pouch:

“I think it depends on the Trade. AS YOU SAY, if I’m doing installation work, I will turn it behind. I use a CLC and have pouches on the sides, including an Impact holster right in front of the pouch, and a hammer (if needed) back left behind the pouch. In other words, I have different pouches for different work, Electrical, Framing, and so on. Furthermore, if I’m in the woodshop or framing and I need to access single nails or screws, I use my Canvas belt and turn to the front.

In conclusion, the most commonly used way of wearing a tool belt is keeping the bags on the side. Keeping in the back is the second most common way of wearing a tool belt”.

How to Organize a Tool Bag

best way to organize tools

Organize a Tool Bag - Save Time

best way to organize tools

So, where do you keep a tool in a tool bag with multiple pouches and pockets? Have you decided to place a particular tool in a specific pocket or pouch after some personal consideration, or have you seen others do it that way? Here is my take on an Organize a Tool Bag.

I have been using tool bags for over two decades now. My father was a contractor, and so was my grandfather. However, I never saw them use a tool bag. I assume that it was not ‘invent’ when they did the construction work.

My father believed in hands-on experience. Therefore, he had my work in different construction fields right from the beginning. In other words, from electrical to plumbing and from framing to trimming, I have done it all before moving up. I had to use an appropriate bag every time my father sent me to department every few months.

When I had a bag with a set of tools for a construction area, I observed where the pros placed the tools. I observed them understand how to create an organized tool bag. Moreover, I always questioned, “why a device was placed in a particular pocket or pouch?” To my surprise, I never received a standard answer from the seniors.

Undoubtedly, the pros had their reasons for placing a tool at a particular location, but the answer always varied.

Consequently, a question popped in my mind: Is it essential to identify the right place for every tool the day you get a tool belt, or you can start by placing tools in any pocket and then choose the right place over time?

Two most crucial ideas for an organized tool bag

1. Yes, it’s better to decide the proper place for your tools from day one.

best way to organize tools

Here’s how to go about it. First, keep all the tools in front of you. After that, put the tools in order of most to most minor use. Next, look at all the spaces available to you on a tool belt. Keep the most frequently used tools nearest to the reach of your hand. That will save you time. Trust me, even a difference of half a second extra ads up to an hour’s overtime.

Unfortunately, I have seen some people keep their frequently used tools farther from them because they just placed it there in the beginning, without considering the placement of the tool, and later got in the habit of keeping it that way.  

2. Fix your tool firmly, if you have to move up and down the ladders

best way to organize tools

That’s important for your safety as well as the others. Your tool belt pocket must hold a tool firmly. In other words, a tool should not be loose in the tool belt pocket. Otherwise, it will cause injury. Make sure your tools are placed firmly in your tool belt from day one. Do not compromise on it.

Good Tool Bag Setup – Increases Productivity

Keeping in mind the above two rules about the tool bag, setup will positively impact your productivity. In conclusion, enjoy your tool belt by deciding the right place for every tool from day one and make sure they are placed firmly in their areas.

Our company produces genuine buffalo skin tool bags. These bags have multiple pouches and pockets, each serving a specific purpose. Again, keep your tools right beside the Trojan tool belt you purchase and decide where you want to keep each tool, considering the above two suggestions.

best way to organize tools

Organize a Tool Bag and Increase Productivity

An organized tool bag will positively impact your productivity. It will give you peace of mind, keeping you calm in most stressful working conditions.

In conclusion, enjoy your tool belt by deciding the right place, for every tool from day one and make sure they are placed firmly in their areas.

Our company produces genuine buffalo skin tool bags. These bags have multiple pouches and pockets, each serving a specific purpose. Again, keep your tools right beside the Trojan tool belt you purchase and decide where you want to keep each tool, considering the above two suggestions.

How to choose the best HVAC tool belts? Top 5 Belts Review

HVAC tool belts

How to Choose the Best HVAC Tool Belts?

Top 5 Belts Review

(Heating, Ventilation, and Air Conditioning)

Get to know what you need to look out for in HVAC tool belts. And how you can choose the best tool system. Also, get to know the top 5 belts according to us.

Are you into windy, hot, and cold stuff?

HVAC tool belts

Yes, basically into the HVAC system. Sorry to be so vague, but I see people not getting into the assignment. People don’t seem to understand how important this job is and how much investment you should be into from working, taking on tasks to buying the equipment you need, all eyes on it.

That’s why I’m here to help you get the perfect HVAC system. Here’s what you need to look out for in HVAC tool belts.

  • Number of tools you carry

You need to see how many tools you use, so you don’t buy a system with fewer pockets and vice versa.

  • Usage duration

What long hours do you work? If you carry heavy tools and work long hours, then you need to use a belt with a liner. Furthermore, you can also use suspenders.

  • Belt size

Great fitting is the key for most users. No one likes a belt that keeps coming down or can’t sustain the weight of the belt.

  • Pricing

There are too cheap systems with low quality and expensive ones that are not worth it.

  • Manufacturers

An HVAC system is a great investment. Therefore, you need to make sure the manufacturers have experience and use quality material.

All these things are very important and need careful consideration. Comfort at work also increases efficiency. Hence, proper equipment is the key to prodigious grind. Therefore, HVAC tool belts are the best answer for smooth working.

HVAC tool belts

This tool belt system would be my number one recommendation. The quality of this system is amazing. The material of this system is genuine leather. You get a long-lasting time with it. Moreover, it has great compatibility to run in a messy or hardcore environment. Since it’s an electrician’s tool belt, it has great multiple pockets in it. You get to have multiple compartments in it. The system has pouches attached to it with small and big tool holder spaces.

To buy the system: https://trojantoolbelts.com/product/best-electrician-tool-belt/

Professional Framer System

HVAC tool belts

A framer seems like for anyone working with wood. However, it has perfect bags with pockets. It also has small and big pockets so you can adjust all sorts of tools that HVAC user uses. Therefore, do take a look at its pockets and see for yourself. Many HVAC users find it very useful.

To buy the system: https://trojantoolbelts.com/product/professional-framer-system/

Electrician Tool Pouch

HVAC tool belts

This product is like a compact and organized drawer. It’s best to keep your tools safe or attached to your belt. It has multiple pockets and perfect stitching. Hence, it gives you an excellent experience. In addition, they’re lightweight as well.

To buy the pouch: https://trojantoolbelts.com/product/electrician-tool-pouch/

Framer with 7 Tool Belt Bags

HVAC tool belts

This tool belt has pockets, holders, and a comfortable belt option. Moreover, it has great manufacturing that will probably last your entire career. It has great resistance to harsh weather. Additionally, this framer system has multiple pockets that keep the HVAC tools organized.

To buy the system: https://trojantoolbelts.com/product/framer-with-7-bags-tool-belt-bags/

Framing Tool Belt

HVAC tool belts

The farming system has great compartments to hold different types of tools. Furthermore, they save you time because you’re able to keep them nearby. Moreover, it has double pockets with a small pouch.

To buy the system: https://trojantoolbelts.com/product/framing-tool-belt/

Overall, these products are a great long-term investment. With time, the comfort of these tool bags increases. As a result, these HVAC tool belts are an incredible product.

Best Electrician Tool Belt – Review by Experienced User

Leather electrician tool belt

Best Leather Electrician Tool Belt - Review by Experienced User.

Here's Why

Hi, I’m Samuel. All these tools and sleek leather systems keep me smiling, and here’s proof.

Leather electrician tool belt

I’ve five years of working experience with a leather electrician tool belt. I think this experience qualifies me to talk about the qualities the best electrician tool belt should have.

I must have used quite a number of belts over the years, each one having a special feature to talk about.  Then the comments made by the fellow electricians are part of my long work experience. So, instead of ranking brands as the electrician tool belts, here is what I think the best should have.

What qualities should the best electrician tool belts have?

1. Let’s start with the material: leather or polyester. If you ask me, the only leather qualifies for this job. Here are my reasons:

● It’s durable. Leather lasts longer than any other material. Sure, you have to oil it once in a while. Still, it’s worth the effort. It is scratch-proof material.

● It has that durability. For me, durability counts. I will explain why durability is so important later in this blog. A durable leather belt has double stitching and rivets.

2. While still on the topic of durability, the buckle on the leather electrician tool belt has to be brass. Or it can be chrome-plated—the steel or iron buckles rust in a few months.

3. After a few uses, you will agree that the electrician tool belt should have good capacity. You cannot bother to come down repeatedly to restock or just to get that tool that your tool belt could not hold.

4. Then, there is the ease of pulling and placing a tool from the belt. You have to be fast and smooth. This you can achieve if the pockets on your belt are well designed. Therefore, for me, the pouch is the most important part of the electrician’s tool belt.

Why are pockets the most important part of the best electrician tool belt?

Leather electrician tool belt

Imagine when you have to finish a job in a hurry. Or you must meet that deadline. You are rushing. That’s when your hands are reaching into the pockets of your belt naturally, pulling out the materials and tool instinctively.

You can do that only if your belt has plenty of pockets and each pocket is well organized, making it the best electrician tool pouch.

And that brings me back to durability. It will take you some time to remember which pocket has what. Now that will take a week or two, and then you won’t have to look down at the belt to find what you need. You can do it naturally. In other words, it will take you a good two weeks to get used to the organization of your belt.

Now, what if your belt is not durable and you end up buying a new one every few months. It would be back to square one, as far as the remembering of the belt organization is concerned.

So now you know why I consider a leather belt to be the leather electrician tool belt. There’s no doubt that it has the best electrician tool pouch and leather material. Secondly, you have to select your own pockets depending upon the kind of jobs you do.

Now I’m off to work in my gear.

Leather electrician tool belt

I hope I was able to answer all your questions. For further queries, you can comment below.